Electrician in Bonita Springs, FL
Check Electric dispatches crews to Bonita Springs from our Naples office at 2169 Trade Center Way Unit A, covering residential, commercial, and Generac generator work. We pull City of Bonita Springs permits and coordinate directly with FPL on service-equipment jobs.
- FL License # EC13004515
- Generac Authorized Dealer
- In business since 2009
- Naples office, Southwest FL dispatch
Licensed Electrician, Local Crew
Our Southwest Florida Office
Where the Crews Dispatch From
Our office sits at 2169 Trade Center Way Unit A in Naples, about twenty minutes from Bonita Springs. Crews dispatch directly from here across Southwest Florida, from Marco Island up through Fort Myers and Cape Coral. This is our mainland operation, separate from our Key West office, with a team of 55 trained electricians across the company behind the work.
Built for a High-Value Market
Median owner-occupied home value here runs $497,100, per the U.S. Census Bureau, which sets the scope reality: 200A and 400A panels, lighting controls, standby generators, and post-storm service-equipment work. The local mix leans toward high-end residential and small commercial construction. Past projects include custom homes, restaurant fit-outs, and whole-home generator installs across our project portfolio.
Problems We Fix Most Often
Four Things That Prompt the Call
Before you call, you usually already know one of four things is off: a panel or outlet acting up, a permit puzzle, a generator decision, or a post-Ian rebuild question. Each one shows up weekly on our electrical services intake.
Panels, Outlets, and Flickering Lights
Diagnose and replace failing circuit breakers, panels, and outlets. NEC-compliant work, same-visit fixes where parts allow. Troubleshooting covers dead circuits, flickering lights, and appliances that trip breakers.
- Panel and breaker replacements
- GFCI and outlet repairs
- Flickering and dead-circuit fixes
City of Bonita Springs Permits
Pull permits through the City of Bonita Springs portal, not Lee County. We track inspection cutoffs and NOC rules so jobs do not stall.
- City permit pull and routing
- Inspection scheduling and prep
- NOC filing on jobs over $5,000
Standby Generators for Storm Season
Generac sales, install, and service. Sized for whole-home loads with transfer switches and extended LP for seasonal owners. Maintenance plans keep units ready when power goes out.
- Generac sizing and quote
- Permit and transfer switch install
- Annual service and storm prep
Post-Ian Rebuilds and Floodplain Work
Service-equipment elevation, panel relocation, and code coordination on substantially improved properties along Bonita Beach and the Imperial River corridor, where FEMA substantial-improvement rules often apply.
- Service-equipment elevation
- Floodplain code coordination
- Insurance documentation help
Residential, Commercial, and Generator Work
Where Our Bonita Crews Plug In
Residential Electrical
For homeowners building, remodeling, or upgrading older service. Scope includes 200A and 400A panel upgrades, GFCI installs, smart-home wiring, lighting controls, landscape and low-voltage lighting installations, fire and smoke alarm systems, and full electrical packages on new construction and remodels. High-end custom builds sit comfortably in our residential project portfolio.
Commercial Electrical
For GCs, property managers, and retail or restaurant operators along US-41. Scope includes new construction, panel and switchgear upgrades, parking lot LED lighting, fire alarm and BDA systems, network cabling, and site lighting. Project scale runs from service calls to ground-up commercial builds. Past work lives in our commercial project portfolio.
Generac Generator Service and Install
For snowbird homeowners and small businesses planning storm-season backup power. As a Generac Authorized Dealer, we handle sizing and quote, install with transfer switch, extended LP options for seasonal owners, and annual service. Sales, install, and service all run under one roof through our Generac project portfolio.
Emergency and After-Hours Service
For outages, damaged service equipment, and post-storm calls outside our standard Monday through Friday, 8 AM to 5 PM hours. Emergency electrical service is available through the same office line. Reach the on-call electrician after hours and we dispatch based on location and crew availability.
Electrical Work Built on Local Fluency
Bonita-Based, Not Keys-Based
Bonita Permitting and FPL
City of Bonita Springs runs its own permit process, separate from Lee County, with its own portal (live since August 2023), inspection cutoffs (revised July 2024), and reinspection fees. FPL's planning window on service-equipment work can run a few months. Getting both right the first time keeps jobs on schedule and pulls weeks out of the timeline.
Full Generac Authorization
Generac Authorized Dealer status means sales, service, and install are all run under factory authorization, not a third-party reseller arrangement. Per the U.S. Census Bureau, 44.2% of Bonita Springs residents are age 65 or older, which is why standby generator demand here outpaces most Southwest Florida markets.
Bonita-Based, Not Keys-Based
We run a team of 55 trained electricians across the company. Crews for this market dispatch from the Bonita office, with a separate Key West office handling Florida Keys work. You get a local crew, local truck stock, and a project manager who can be on-site the same week, not a contractor driving in from another region.
How a Job Runs With Us
Job Details to Closeout
- 01
Send Us the Job Details
Call (239) 399-3299, email naplesoffice@checkelectricllc.com, or submit a service request online. For commercial bids, email Admin@checkelectricllc.com. Most requests get a same-day or next-business-day reply.
- 02
Walk the Site or Scope the Job
For residential and service work we schedule a visit. For commercial bids we perform a precon walkthrough with the GC or property manager. You get a written scope and price after we see what is actually there.
- 03
Pull Permits and Coordinate Utility
We file with the City of Bonita Springs or Lee County, depending on jurisdiction, and coordinate with FPL on any service-equipment work. NOC is filed on jobs over $5,000.
- 04
Crew On-Site
Crews dispatch from the Bonita office. Standard scope for service work wraps in one visit. Commercial jobs run on a schedule agreed with the GC.
- 05
Inspection and Closeout
We meet the inspector on-site, address any corrections, and walk you through what was done. You get the final paperwork, including the permit closeout where applicable.
Service Area From Our Bonita Office
Home Base and the SWFL Coast
Bonita Springs is our home base, and we dispatch from here across these areas and the surrounding Southwest Florida coast.
- Bonita Bay
- Pelican Landing
- Bonita National
- Worthington
- Bonita Beach
- Downtown Bonita Springs
- Imperial River area
- Spring Creek area
- East Bonita Springs
- Naples
- Marco Island
- Fort Myers
- Cape Coral
Common Electrical Questions
Bonita Springs Electrician FAQs
- Do you handle permits and inspections in Bonita Springs?
- Yes. We pull City of Bonita Springs permits (or Lee County for the unincorporated periphery) and meet the inspector on-site at closeout. The city portal has been live since 2023, and any job over $5,000 requires a Notice of Commencement filed before work starts. Handling this in-house typically saves two to three weeks compared to self-pulling, because we know the plan review queue, the inspection cutoff times, and which corrections the local inspectors flag most often. Submission paperwork is handled through the City of Bonita Springs Community Development office.
- How much does an electrician in Bonita Springs cost?
- Prices range widely because scope ranges widely. Small service calls run $1,000 - $5,000, panel and service-equipment work runs $5,000 - $15,000, and ground-up commercial sits at a different scale entirely. We quote off an on-site walk or a precon review, never a phone number, and the walkthrough is free. Pricing includes diagnostic time, parts where applicable, permit fees on permitted work, and FPL coordination on service-equipment jobs. Generac installs land in the $10,000 - $20,000+ band depending on load sizing, transfer switch type, and gas line work.
- Do you work in gated communities like Bonita Bay or Pelican Landing?
- Yes. Our crews are familiar with the vetted-contractor and access requirements at Bonita Bay, Pelican Landing, Bonita National, and Worthington. We keep current Right of Entry forms on file where required, coordinate with the HOA or property management office before showing up, and handle gate logistics in advance so trucks are not stuck at the call box. High-end residential expectations (hidden conduit runs, lighting control integration, standby generator with extended LP) are standard scope for us, not a stretch. We've worked across most of the gated golf communities in this part of Southwest Florida.
- How quickly can you schedule work that needs FPL coordination?
- It depends on whether FPL has to touch the service equipment. Per the FPL Electric Service Standards, new and service-related projects can take a few months of planning. We file FPL paperwork early and run permit and FPL workflows in parallel so the two timelines overlap rather than stack. For straight service calls with no FPL involvement, we can usually be on-site within the same week. For panel upgrades, service upgrades, and new construction tie-ins, plan on the FPL window driving the schedule and start the conversation sooner rather than later.
- What payment methods do you accept?
- We invoice by milestone on larger projects and bill at completion on residential service work. Commercial projects run on a bid-and-milestone schedule agreed with the GC or property manager up front, with progress invoicing tied to scope completion. Residential service work is billed when the job is finished and signed off. For specific accepted methods on your job, the office can confirm at scheduling. Check Electric does not currently advertise outside financing programs.
- What warranty covers the equipment you install?
- Manufacturer warranties on Generac generators, panels, breakers, and other installed equipment run under the manufacturer's terms, which we hand over with the closeout paperwork. We register the equipment on your behalf so coverage is active from day one, and as a Generac Authorized Dealer we perform the factory warranty service ourselves. That service is dispatched out of the Naples office on the same line as new work, so you are not calling a separate department. To log a callback, call (239) 399-3299 or email naplesoffice@checkelectricllc.com with the original job reference.
- What if work needs to be redone or doesn't pass inspection?
- If an inspector flags a correction on our scope, we come back, address it, and re-schedule the inspection at no extra labor cost to you. Reach the office at (239) 399-3299 to log the issue, and the project manager who ran the original job owns it through closeout. Re-dispatch happens during standard hours, and we handle the rescheduling with the inspector directly. The goal is to get the final sign-off without you having to chase paperwork or coordinate around our calendar.
- How do I hire an electrician in Bonita Springs and get on the schedule for an estimate?
- Call our Naples office at (239) 399-3299 or send a service request through the contact form online. The sequence from there is short: phone or message comes in, we review the scope, we book the on-site walk or precon, and you get a written quote after the visit. For commercial bids, route the inquiry to Admin@checkelectricllc.com so it lands with the right project manager. Send us the job details and we will scope what is needed.
Stalled Permits and Long FPL Windows Get Worse, Not Better
Send the job details and our Bonita office will scope what is needed before the queue tightens.
Next Steps
Contact Our TeamLicensed & Insured — Ready 24/7 Across the Florida Keys and Southwest Florida